The 10 Most Terrifying Things About Double Glazing Lock Repairs
repairing double glazing Glazing Lock Repairs
Quality locks on your doors and windows will help prevent burglars from entering your home. In general, they don't enjoy breaking glass or squeezing through windows that are not closed.
However, some double-glazing owners have encountered issues with their door or window lock after it was installed. These problems can often be solved without the need to replace double glazing repair glazing.
Broken or damaged locks
If your uPVC door or window lock is damaged or broken and requires a locksmith, they can repair it for you. They can repair the striker plates, hinges, and locks on your double glazed Window repair-glazed. They can also reposition the cylinder in order to fix any misalignment which could be causing your handle not to work properly.
If the key fits into the lock, but it doesn't turn or is difficult to insert then the mechanism may be locked up. The dirt or grease could get stuck in the mechanism. If this is the situation it could be possible for the lock to be cleaned and lubricated. It is crucial to make use of a dry lubricant such as teflon or graphite instead of oil, which can attract dirt and stick to the inside of the mechanism. After lubricating the lock, you should insert the key and then try to turn it. The lubricant should be absorbed into the mechanism, and the lock should spin effortlessly.
A faulty lock can also be caused by loose screws in the lock mechanism. They can loosen, fall out, or even break off completely preventing the lock to perform as it should. A screwdriver can be used to tighten these screws however, it is important not to tighten them too much as this can damage the internal components.
A faulty lock can be dangerous for you and your family, particularly if you have young children. They could easily open the door without your knowledge which gives them access to your house. If you are worried about this happening, a licensed locksmith can offer rapid and effective service to re-secure your double glazing doors.
Misty Glaze are a professional uPVC and double glaze window repair glazing business in Lancing that can fix any type of defective and broken mechanisms, handles, cylinders and lock systems for both uPVC windows and doors. We can also alter the locking mechanism on your uPVC windows or double glazed window repair glazing to meet your requirements. This means that replacement windows and doors are not always required.
Handles that are broken or damaged
A lot of double-glazed windows come with a multi-point lock as part of the overall security package. This is a great choice for those who are concerned about burglars who are opportunistic and trying to gain entry to their home. It is also a good idea to ask your locksmith about anti-lift blocks which can be put in in addition to the locks that are already in place to will keep your window secured in its closed position.
It's not uncommon for handle locks to become damaged or fail. They are the first part of your window that will be forced open by criminals intent on breaking in. The good news is, this is one of the easiest parts to fix.
Modern uPVC and aluminium handles have a multi-point locking mechanism called Espagnolette which is designed to withstand forced entry. This security upgrade is available as an option with new uPVC windows. Older style uPVC and aluminium handles can be upgraded to lock systems that shoot bolts and again as an additional option on double-glazed window installations.
It is important to repair the handle as soon as possible after it has been damaged. The damaged handles could stop the window from closing properly and allow a draft to enter. It could also be a weak point that burglars who are opportunistic might exploit, placing your home and belongings at risk of being taken.
The process of fixing the malfunctioning mechanism begins by opening the window frame and removing the damaged handle. The gearbox that opens the handle is located and the model is identified so a replacement can be sourced which is in line with the profile of the internal window frame mechanisms.
Once the mechanism has been replaced the handle can be re-attached using the original screws - however, we usually recommend replacing them with longer ones because this will ensure a more secure fit. The final step is to seal the handle with an opaque sealant. This will protect it from further corrosion. After that your window will be fully operational again, and at only a fraction of the cost of replacing the entire window.
Hinges that are Broken or damaged
If your windows aren't shut correctly, draughts may be able to enter, your home's security barriers will weaken and you run an increased chance of water damage or damp. Broken or faulty window hinges are a typical issue that can be fixed easily.
If you have a uPVC window that won't close or open it's likely that the hinges are broken or damaged and require replacement. While most window manufacturers require that you purchase a new window to fix this simple problem We're able to repair the faulty hinges and save you money.
Window hinges may break from repeated use or they may be weakened through rust over time. If you find a damaged hinge, it's crucial to take precautions to avoid further damage by taking care not to make the window swing to open or close.
Identifying your hinge type will help you locate the right parts to repair it. Common types of window hinges are Maco, Mila, Roto and many other brands. It's best to consult an expert in this regard to avoid the mistake of purchasing parts that aren't compatible with your current hardware and could cause further damage.
Faulty hinges are a major issue for uPVC doors and windows. They can be a significant source of noise and also allow for water infiltration which could damage your windows.
To resolve this issue, first check whether the pin barrel on both hinge halves is aligned. If not, tap the head pin using an hammer to create a small bend in the hinge barrel. This will help keep the pin in place. Ask a friend to hold the doors while you take off hinge screws and hinges. Replace the hinges and attach screws using glue. Finally, secure the hinges with clamps or weights until the glue is drying.
Once the hinges have been fixed, you should be able to put back the door and attach the handle. Replace the screws using wood dowels of the same length as the original screw to ensure they are in line.
Glass that is damaged or damaged
While uPVC windows do an excellent job of keeping the cold out and warm in, they can become damaged over time. This could include broken or damaged glass as well as damaged locks. This is an issue that could be extremely costly when left unattended. It can also detract from the aesthetics of your house and can lead to loss of insulation, so it's crucial to repair any damage as quickly as you can.
If your glass has cracked but not shattered it is possible to fix it yourself using the appropriate tools and methods. First, make sure that the surrounding area surrounding the glass is clean so that any shards won't cause injury to anyone or are an accident hazard. After that, take away any broken glass pieces and dispose of them in a proper manner. Apply masking tape over the entire area. This will stop shards of glass from sticking to your skin and scattering when you move them. Making sure the glass pane is fitted prior to adhering it to the wall is a good idea in the case of a window that has two panes. This will ensure that you have enough room to finish your project.
Use a clean, dry cloth to clean the surface of the broken glass and the frame before applying the glue. Follow the curing and application directions that differ from product to product. You may have to clamp the cracked glass with clamps made of lightweight materials designed to hold fragile materials, based on the angle.
After the adhesive has completely cure, carefully insert the glass into the window frame. Make sure it is in line with the frame edge and that there aren't gaps between the glass sash and frame. Be careful not to bend the glass when you put it back in place because this could weaken the seal. This could lead to water infiltration or condensation.
If you have a glass window that's completely broken or has larger cracks, consult a professional glazier such as O'Brien(r) to organise the replacement. It's crucial to act fast in the event of broken glass.